Universal Programmer LabTool-48UXP | Universal Programmer LabTool-48UXP >> Product Name: Universal Programmer LabTool-48UXP Part No: P009 Net Weight: 1.8KG Introduction The LabTool-48UXP USB is a universal device programmer, which works through your PC’s
parallel port. It features a 48-pin universal pin driver and an
expandable TTL pin driver. It supports over 5600 different devices
(including memory, logic and single chip) that’s over 11000 devices
including different package forms in current software release, new
chips are added to the support lists every few months.
This price is main unit only, if you want to buy adapters, please
contact us
Universal pin driver—True universal programming
The LabTool-48UXP features universal pin driver, each pin can
supply four different voltage, ground, it also can be configurable
as TTL high/low levels with pull-high/pull-low, high-speed clock
and high impedance. This advanced pin design lets you program any
DIL device of up to 48 pins without needing an adapter.
Unbeatable programming speed
The LabTool-48UXP’s on-board intelligence reduces system overhead
to a minimum. The LabTool-48UXP has 100% more performance then its
predecessor product in program the high density flash chip, it can
program a Intel 32 M bit flash chip in less then 60 seconds.
Device insertion and contact checks—No mistakes!
The LabTool-48UXP performs device insertion and contact checks
before it programs each device. It can detect poor pin contact and
devices inserted upside down or in the wrong position. This
function protects your pocketbook by preventing expensive chip
damage due to operator error.
EPROM and Flash memory ID detection
Many EPROM and Flash memories have a build-in device ID and
manufacturer ID. The LabTool-48UXP can read the device’s ID by
press hot key to detect the ID and compare its database and
determined the chip? correct vendor and product number. This
feature is especially useful with secondhand chips and devices that
have had their part number accidentally (or intentionally) removed
(this function only applied to 28 pin or 32 pin EPROM and Flash).
Auto-sensing and self-programming
To meet mass-production requirements the LabTool-48UXP has
implemented new patented technology in both its hardware and
software. After entering the Mass-production Mode, the production
line operator inserts a device into the ZIF socket. An LED on the
LabTool-48UXP indicates the device is ready and the operator simply
removes it and replaces it with a new one. No formal training is
necessary adding flexibility and saving time and money. In
addition, the LabTool-48UXP’s auto-sensing feature ensures the
device has been inserted correctly and then automatically programs
the device. Furthermore, in the mass-production mode the system
keyboard is automatically disabled preventing the operator from making any inadvertent mistakes.
Memory buffer auto Increment
If your memory devices need individual serial numbers, the
LabTool-48 has an Auto Increment function, This simply increments
the serial numbers in the buffer each time a new device is
inserted. This saves time and money. The LabTool-48 has everything
you need in one package: 48-pin driver, socket and complete device
support library. You don’t need to order separate device libraries.
User-selectable verify voltage, one- or two-pass verification
The LabTool-48XP lets you select the verify voltage after you have
programmed the device, e.g., Vcc, Vcc ?%, Vcc ?0%. The Vcc voltage
can be 2.0V to 6.5V. This feature ensures that your device has been
programmed properly, preventing failures due to programming errors
and ensuring data retention.
Easy operation—Get to work immediately
The programming software’s easy-to-use graphical interface
eliminates your learning curve—you don’t need the manual! Like
MS-Windows, the software offers pop-up dialog boxes and on-line
help. You can simply type the device vendor’s name and part number.
The software will select the proper driver automatically; you don’t
need to search one by one through long lists of devices.
Serialization function
If your memory devices need individual serial numbers with
different increment sequence and initial value, the LabTool-48XP
has an Auto Increment function. This simply increments the serial
numbers in the buffer each time a new device is inserted. This
saves time and money.
Project file save option
User can create and save a project file which contains device
selection, buffer data and all the programming set-up options, this
proje |
